HIKVISION DS-7608NI-SP Series User Manual Download Page 158

Page: 158 / 269

User Manual of Network Video Recorder

157

10.5

Heat Map

Purpose:

Heat map is a graphical representation of data represented by colors. The heat map function is usually used to

analyze the visit times and dwell time of customers in a configured area.

The heat map function must be supported by the connected IP camera and the corresponding configuration must be

set.

Steps:

Enter the

Heat Map

interface.

Menu>VCA Search> Heat Map

Select the camera for the heat map processing.

Select the report type to Daily Report, Weekly Report, Monthly Report or Annual Report.

Set the statistics time.

Figure 10. 8

Heat Map Interface

Click the

Counting

button to export the report data and start heat map statistics, and the results are displayed

in graphics marked in different colors.

As shown in the figure above, red color block (255, 0, 0) indicates the most welcome area, and blue color

block (0, 0, 255) indicates the less-popular area.

You can click the

Export

button to export the statistics report in excel format.

Summary of Contents for DS-7608NI-SP Series














































































































































































































































































Search results

Summary of Contents for DS-7608NI-SP Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7608NI-SP Series, User Manual

Search results

Summary of Contents for DS-7608NI-SP Series

Reviews:

Brands by name

Popular brands