HIKVISION DS-7608NI-SP Series User Manual Download Page 103

Page: 103 / 269

User Manual of Network Video Recorder

102

Click the

button and then click and draw the mouse to set the detection area manually. You can also

click the

button to set the full screen as the detection area.

You can click

to configure the smart settings.

Figure 6. 13

Smart Settings

Skip the Non-Related Video:

The non-related video will not be played if this function is enabled.

Play Non-Related Video at:

Set the speed to play the non-related video. Max./8/4/1 are selectable.

Play Related Video at:

Set the speed to play the related video. Max./8/4/1 are selectable.

Pre-play and post-play is not available for the motion event type.

Click

to search and play the matched video files.

(Optional) You can click

to filter the searched video files by setting the target characters, including the

gender and age of the human and whether he/she wears glasses.

Figure 6. 14

Set Result Filter

6.1.6

Playing Back by System Logs

Purpose:

Play back record file(s) associated with channels after searching system logs.

Summary of Contents for DS-7608NI-SP Series














































































































































































































































































Search results

Summary of Contents for DS-7608NI-SP Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7608NI-SP Series, User Manual

Search results

Summary of Contents for DS-7608NI-SP Series

Reviews:

Brands by name

Popular brands