HIKVISION DS-7604NI-SE User Manual Download Page 93

Page: 93 / 194

User Manual of DS-7600NI Series NVR

7.1

Backing up Record Files

7.1.1

Quick Export

Purpose:

Export record files to backup device(s) quickly.

Steps:

Enter Video Export interface.

Menu>Export>Normal

Choose the channel(s) you want to back up and click

Quick Export

button.

Note:

The time duration of record files on a specified channel cannot exceed one day. Otherwise, the

message box “Max. 24 hours are allowed for quick export.” will pop up.

The number of channels for synchronous export cannot exceed 4. Otherwise, the message box “Max. 4

channels are allowed for synchronous quick export.” will pop up.

Figure 7. 1

Quick Export Interface

Click the

Export

button to start exporting.

Note:

Here we use USB Flash Drive and please refer to the next section Normal Backup for more backup

devices supported by the device.

Figure 7. 2

Quick Export using USB1-1

Summary of Contents for DS-7604NI-SE



































































































































































































Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands

HIKVISION DS-7604NI-SE, User Manual

Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands