HIKVISION DS-7604NI-SE User Manual Download Page 110

Page: 110 / 194

User Manual of DS-7600NI Series NVR

110

8.2

Setting Sensor Alarms

Purpose:

Set parameters and handling action of an external sensor alarm.

Steps:

Enter Alarm Settings of System Configuration and select an alarm input.

Menu> Configuration> Alarm

Select Alarm Input tab to enter Alarm Input Settings interface.

Figure 8. 4

Alarm Status Interface of System Configuration

Set up the handling action of the selected alarm input.

Check the

Enable

checkbox and click

button to set up its alarm response actions.

Figure 8. 5

Alarm Input Setup Interface

Select Trigger Channel tab and select one or more channels which will start to record or become full-screen

monitoring when an external alarm is input.

Select

Arming Schedule

tab to set the channel’s arming schedule.

Choose one day of a week and Max. eight time periods can be set within each day.

Note:

Time periods shall not be repeated or overlapped.

Select

Linkage Action

tab to set up alarm response actions of the alarm input (please refer to

Chapter

Summary of Contents for DS-7604NI-SE



































































































































































































Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands

HIKVISION DS-7604NI-SE, User Manual

Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands