HIKVISION DS-7604NI-SE User Manual Download Page 71

Page: 71 / 194

User Manual of DS-7600NI Series NVR

5.8

Configuring HDD Group for Recording

Purpose:

You can group the HDDs and save the record files in certain HDD group.

Steps:

Enter HDD setting interface.

Menu>HDD

Figure 5. 25

HDD General

Select

Advanced

on the left bar.

Figure 5. 26

Storage Mode

Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,

please refer to

Chapter 12.4 Managing HDD Group

Select

General

in the left bar.

Click

to enter editing interface.

Configuring HDD group.

Choose a group number for the HDD group.

Click

Apply

and then in the pop-up message box, click

Yes

to save your settings.

Click

to back to the upper level menu.

Repeat the above steps to configure more HDD groups.

Choose the Channels which you want to save the record files in the HDD group.

Select

Advanced

on the left bar.

Choose Group number in the dropdown list of

Record on HDD Group

Check the channels you want to save in this group.

Click

Apply

to save settings.

Note:

After having configured the HDD groups, you can configure the recording settings following

the procedure provided in

Chapter 5.2-5.7

Summary of Contents for DS-7604NI-SE



































































































































































































Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands

HIKVISION DS-7604NI-SE, User Manual

Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands