HIKVISION DS-7604NI-SE User Manual Download

Page: 40 / 194

User Manual of DS-7600NI Series NVR

3.1

Introduction of Live View

Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live

View mode when powered on.

Live View Icons

In the live view mode, there are icons at the right top of the screen for each channel, showing the status of the

record and alarm in the channel, so that you can know whether the channel is recorded, or whether there are alarms

occur as soon as possible.

Table 3. 1

Description of Live View Icons

Icons

Description

Alarm (video loss, tampering, motion detection or sensor alarm)

Record (manual record, schedule record, motion detection or alarm triggered record)

Alarm & Record

Summary of Contents for DS-7604NI-SE



































































































































































































Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands

HIKVISION DS-7604NI-SE, User Manual

Search results

Summary of Contents for DS-7604NI-SE

Reviews:

Related manuals for DS-7604NI-SE

Brands by name

Popular brands