HIKVISION DS-7304HFI-SE, User Manual

Page: 52 / 63

User Manual of DS-7304HFI-SE DVR
52
8.1 Configuring Privacy Zones
1.
Enter the Privacy Zones menu, shown in Figure 45 by going to Main Menu > Camera Setup > Privacy Zones.
Figure 45. Privacy Zone Menu
2.
Select the camera to setup privacy zones in using the camera drop down menu on the upper left of the menu. If
all cameras are to be configured with the same settings, select
All Cameras
from the list
.
3.
Click
Enable Privacy Zones
.
4.
Up to four privacy zones can be used per camera and are shown using four different colors, yellow, green, blue
and pink. Using the mouse, click and drag out rectangular boxes defining the desired zones.
5.
You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or Clear All button
to clear all zones.
6.
Select the Save button to save the privacy zones settings and select Exit to return to the previous menu. Selecting
the Exit button without clicking Save will quit out of the menu without saving settings.
8.2 Configuring Video Tampering Detection
Video tampering detection can be used to recognize if an area of a camera is purposely covered and to respond accordingly.
To configure video tampering detection:
1. Enter the Video Tampering Detection menu, shown in Figure 46 by going to Main Menu > Camera Setup > Video
Tampering Detection
.
Figure 46. Video Tampering Detection Menu
2. Select the camera to setup video tampering detection in using the camera drop down menu on the upper left of the
menu. If all cameras are to be configured with the same settings, select
All Cameras from the list .
3. Click Enable Video Tampering Detection .