HIKVISION DS-7204HQHI-K1 Page 49 User Manual Download

Page: 49 / 184

Digital Video Recorder User Manual

Figure 3-4 Channel-Zero Encoding

3. Configure Frame Rate, Max. Bitrate Mode, and Max. Bitrate.

Note

The higher frame rate and bitrate require the higher bandwidth.

4. Click Apply.

You can view all the channels on one screen via CMS or web browser.

3.1.5 Use an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. Features include:

Single Screen

Switch to a full screen display of the selected camera. Camera can be selected from a dropdown
list.

Multi-screen

Switch between different display layout options. Layout options can be selected from a
dropdown list.

Next Screen

When displaying less than the maximum number of cameras in Live View, clicking this feature
will switch to the next set of displays.

Playback

Enter into Playback mode.

PTZ Control

Enter PTZ Control mode.

Main Monitor

Enter Main operation mode.

Summary of Contents for DS-7204HQHI-K1

























































































































































































Search results

Summary of Contents for DS-7204HQHI-K1

Reviews:

Related manuals for DS-7204HQHI-K1

Brands by name

Popular brands

HIKVISION DS-7204HQHI-K1, User Manual

Search results

Summary of Contents for DS-7204HQHI-K1

Reviews:

Related manuals for DS-7204HQHI-K1

Brands by name

Popular brands