HIKVISION DS-7204HQHI-K1 Page 148 User Manual Download

Page: 148 / 184

Digital Video Recorder User Manual

128

Remotely viewing live video of the selected camera(s).

Local Manual Operation

Locally starting/stopping manual recording and alarm output of the selected camera(s).

Remote Manual Operation

Remotely starting/stopping manual recording and alarm output of the selected camera(s).

Local Playback

Locally playing back recorded files of the selected camera(s).

Remote Playback

Remotely playing back recorded files of the selected camera(s).

Local PTZ Control

Locally controlling PTZ movement of the selected camera(s).

Remote PTZ Control

Remotely controlling PTZ movement of the selected camera(s).

Local Video Export

Locally exporting recorded files of the selected camera(s).

Local Live View

View live video of the selected camera(s) in local.

4. Click OK to save the settings.

11.2.2 Set Live View Permission on Lock Screen

The admin user can set live view permission for specific cameras in the screen lock status of
device.
●

The admin user can set this permission for user accounts.

●

When the normal user (Operator or Guest) has no local live view permission for specific camera
(s), the live view permission for such camera (s) on lock screen status cannot be configured (live
view not allowed by default).

Steps
1. Go to System → User.
2. Click Live View Permission on Lock Screen.
3. Input admin password and click Next.

Summary of Contents for DS-7204HQHI-K1

























































































































































































Search results

Summary of Contents for DS-7204HQHI-K1

Reviews:

Related manuals for DS-7204HQHI-K1

Brands by name

Popular brands

HIKVISION DS-7204HQHI-K1, User Manual

Search results

Summary of Contents for DS-7204HQHI-K1

Reviews:

Related manuals for DS-7204HQHI-K1

Brands by name

Popular brands