manualshive.com logo in svg

HIKVISION DS-7104NI-K1, Manual

Share
Download
HIKVISION DS-7104NI-K1 Manual Download Page 53

Figure 6-1 Basic Settings

Configure DST Settings

DST (Daylight Saving Time) refers to the period of the year when clocks are moved one period

ahead. In some areas worldwide, this has the effect of creating more sunlit hours in the evening

during months when the weather is the warmest.
Go to Configuration → System → General → DST Settings , configure the parameters as your

desire, and click Apply.

Configure More Settings

You can configure your device name, lock screen time, output mode, etc.
Go to Configuration → System → General → More Settings , configure the parameters as your

desire, and click Apply.
Device Name

Edit the video recorder name.

Device No.

The number is required in the connection with remote control, network keyboard, etc. Edit the

serial number of video recorder. The Device No. can be set in the range of 1~255, and the

default No. is 255.

Lock Screen

Set timeout time for lock screen.

Menu Output Mode

Network Video Recorder

40

Summary of Contents for DS-7104NI-K1



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands