Figure 5-13 Intrusion Detection
2. Select a camera.
3. Turn on Enable.
4. Set detection rules and detection areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Set Sensitivity. The size of the object that can trigger the alarm. The higher the value is, the
easier the detection alarm can be triggered. Its range is [1-100].
3) Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
4) Click Draw Area to draw a quadrilateral detection region.
5. Set the arming schedule. Refer to for Configure Arming Schedule for details.
6. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
7. Click Apply.
Region Entrance Detection
Region entrance detection detects objects that enter a predefined virtual region.
Steps
1. Go to Configuration → Camera → Event → Region Entrance .
Network Video Recorder
30
Summary of Contents for DS-7104NI-K1
Page 1: ...Network Video Recorder ...
Page 97: ...Figure 10 2 Device Command Network Video Recorder 84 ...
Page 98: ...UD24562B ...
