HIKVISION DS-6300DI-JX Series, User Manual, Page: 39 / 53

User Manual of DS-6300DI-JX Decoder
38
The Image Scale is used to control the scaling display of output video image, which can be set to Stretching
(full-screen) or Auto Fill (original scale) display mode from the drop-down menu. When the output video
resolution is
4: 3
and the monitor resolution is 16: 9, the image will be displayed with black border on left and
right in Auto Fill display mode. When the output video resolution is 16: 9 and the monitor resolution is 4: 3,
the image will be displayed with black border on top and bottom in Auto Fill display mode.
5.1.7 Picture Overlay
Purpose:
The “Picture Overlay” function can overlay a picture on the screen for the selected decode channel, and the
position of the picture overlaid on the screen can also be set here.
Steps:
1. Click Decode Operation

Decode Control

Picture Overlay to enter the following interface:
2. Select the decode channel in the dropdown list in the Decode Channel field.
3. Browse to choose a picture in the local disks.
4. Set the X coordinate and the Y coordinate of the picture displayed on the screen to move the picture up
and down and left and right.
Note: The picture must be in 32-bit BMP format and its width and height must be 32X pixel, with up to 128×128
resolution supported.
5.1.8 Checking the Connection Status
Purpose:
Connection status shows the status of the decoding status and the network connection status of the decode channel.
Steps:
Click Decode Operation

Decode Status

Connection Status to view the connection status of the current decode