User Manual of DS-6300DI-JX Decoder
23
2.
Click
Add
to add the decoder to the management list of the software.
3.
Enter the Nickname, IP address and port number of the device, and input the user name and password to
get access to it. The nickname is the name you customized and give to the decoder on the client software.
Or
If you add the decoder with a private domain name, you can check the checkbox before
Private Domain
Mode
and enter the needed information.
4.
You can also click
Show online devices
to search the online devices in the same network segment. And
if there are online devices in the same network segment, they are listed in the left part on the interface
shown in the following figure.
Summary of Contents for DS-6300DI-JX Series
Page 1: ...DS 6300DI JX Series Decoder USER MANUAL Version 3 2 0...
Page 9: ...User Manual of DS 6300DI JX Decoder 8 C H A P T E R 1 Introduction...
Page 13: ...User Manual of DS 6300DI JX Decoder 12 C H A P T E R 2 Panel Connections...
Page 17: ...User Manual of DS 6300DI JX Decoder 16 C H A P T E R 3 Network Parameters Configuration...