HIKVISION DS-6300DI-JX Series, User Manual, Page: 11 / 53

User Manual of DS-6300DI-JX Decoder
10
H.264 and MPEG4 are adopted.
Dynamic decoding : dynamically input encoder’s IP address and switch decoding channels; maintain rapid
decoding and switch.
Cycle decoding : set multiple remote monitoring channels on a decoding channel, and the decoder is capable
of performing cycle decoding according to the configured sequence and time. The stream sources can be
obtained via remote access to the encoder or stream media server and decoded for local output. A maximum
of 64 channels are allowed for cycle decoding.
Obtain stream from stream media : receive real-time data by remote access to private stream media server,
and then decode stream for local output.
Remote playback of encoder’s record files
: remote playback of record files by time or by file. Remotely
access to the encoder with storage capability, and directly obtain the record files from the encoder, and
finally decode for local output.
Passive decoding : the decoder passively receives stream sources form the other devices or software, and
then proceeds decoding and transmission.
Third-party IP Camera Access
Multiple brands of IP cameras from different manufactures are supported: Sony, Panasonic, Sanyo, Axis, Bosch,
etc. Please refer to Appendix B.
Network

One 10M / 100M /1000Mbps self-adaptive UTP Ethernet interface.
Support TCP, UDP and MCAST network protocols.

Get allocated IP address, sub mask and gateway via DHCP server.

Accomplish auto time adjustment for decoder through NTP protocol.

Capable of searching decoder in real time through SADP software, as well as modifying the IP address, sub
mask, gateway of decoder and some other parameters.

Capable of accessing decoder by TELNET command to view device information, modify network
parameters, etc.
Alarm

Relay Alarm Input
The decoder provides alarm input/output ports in relay signal input mode which can be set to NO or NC. Up to
8 different arming periods can be set, in which the alarm occurs, the device is capable of triggering
corresponding alarm handling method, relay output and buzzer alarm, as well as upload to center, etc.

Relay Alarm Output
The relay alarm output can be connected to alarm devices for alarm response actions, e.g., combined aural and
visual alarm unit, etc., which is capable of proceeding alarm handling within the arming period.
Exception Handling

Exception Alarm Handling
Exception alarms include network disconnect alarm, IP address conflict alarm, illegal access alarm, etc.;
multiple alarm handling methods are supported: relay alarm output, buzzer alarm, upload to center, etc.

Exception Reboot
Software watchdog capability: for inspecting important threads and system resources of device; in case of