User Manual of Network Speed Dome
85
Figure 6-48 Linkage Method
Check the checkbox to select the linkage method. Notify surveillance center,
send email, upload to FTP, trigger channel and trigger alarm output are
selectable.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when
an event occurs.
Send Email
Send an email with alarm information to a user or users when an event
occurs.
To send the Email when an event occurs, you need to refer to
Section
6.3.11 Configuring Email Settings
to set the Email parameters.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a
FTP server.
You need a FTP server and set FTP parameters first. Refer to
Section
6.3.8 Configuring FTP Settings
for setting FTP parameters.
Trigger Channel
Record a video when an event occurs.
You have to set the recording schedule to realize this function. Please
refer to
Section 7.3 Configuring Recording Schedule
for settings the
recording schedule.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
To trigger an alarm output when an event occurs, please refer to
Section 6.6.5 Configuring Alarm Output
to set the alarm output
parameters.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]