HIKVISION DS-2DF6336V-AEL User Manual Download Page 30

Page: 30 / 139

User Manual of Network Speed Dome

Figure 4-3 Start Live View

Table 4-1 Descriptions of the Toolbar

Icon

Description

Icon

Description

Start/Stop Live view

Manually capture the
pictures

Manual recording off/on

/ Mute / Audio on and

adjust volume

Two-way audio off/on/

Enable / Disable Regional
Focus

Enable / Disable Regional
Exposure

3D positioning

Manual tracking



Not all the speed dome models support the above functions. Please take the
browser interface of the actual product as standard.



Before enabling the two-way audio or recording with audio functions, please
set the

Stream Type

Video & Audio

referring to Section

6.4.1 Configuring

Video Settings

Full-screen Mode:

You can double-click on the live video to switch the current live view into full-screen
or return to normal mode from the full-screen.

Regional Focus:

Steps:

1. Click the

on the toolbar to enter the regional focus operation mode.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Summary of Contents for DS-2DF6336V-AEL












































































































































Search results

Summary of Contents for DS-2DF6336V-AEL

Reviews:

HIKVISION DS-2DF6336V-AEL, User Manual, Page: 30 / 139

Search results

Summary of Contents for DS-2DF6336V-AEL

Reviews: