User Manual of Network Speed Dome
87
covered.
Steps:
1.
Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Basic Event > Video Tampering
Figure 6-50 Tampering Alarm
2.
Check
Enable Video Tampering
checkbox to enable the tampering detection.
3.
Set the tampering area. Refer to
Step 1
in
Section 6.6.1 Configuring Motion
4. Click
to edit the arming schedule for tampering. The arming schedule
configuration is the same as the setting of the arming schedule for motion
detection. Refer to
Step 2
in
Section 6.6.1 Configuring Motion Detection
5.
Check the checkbox to select the linkage method taken for the tampering. Notify
surveillance center, send email, trigger channel and trigger alarm output are
selectable. Please refer to
Step 3
in
Section 6.6.1 Configuring Motion Detection
6. Click
to save the settings.
6.6.4 Configuring External Alarm Input
Steps:
1.
Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input
2.
Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed).
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]