User Manual of Network Speed Dome
46
Figure 5-12 Configure Smart Tracking
2.
Check the
check box to enable smart tracking function.
3. Click the PTZ buttons to select an object.
4.
Click
to set the current zoom ratio as the tracking zoom ratio.
5.
Set the tracking duration. The speed dome stops tracking when the duration time
is up. The duration ranges from 0 to 300 seconds.
Setting the duration to 0 means that there͛
no duration when speed dome
tracks.
Not all the speed dome models support this function. Please take the browser
interface of the actual product as standard.
5.8 Configuring PTZ Control Priority
Steps:
1. Get to the configuration interface:
Configuration > Advanced Configuration> PTZ > Prioritize PTZ
.
The speed dome can be controlled by network and RS-485 signals. You can set
the control priority of these two signals.
The operation of
Operator
is prior to that of
User
. When the
Operator
is
controlling the speed dome, the
User
cannot control it. When the
Operator
finishes, the
User
can control the speed dome after the
Delay
time. The
Delay
time can be set in Priority PTZ interface as shown follows.
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]