User Manual of Network Speed Dome
101
When the initialization completed, the status of disk will become
Normal
as
shown in Figure 7-5.
Figure 7-5 View Disk Status
2.
Configure the quota for saving the video and picture.
Enter the percentage for picture and record in the text filed, and the total
percentage must be 100%.
Figure 7-6 Setting Quota
7.3 Configuring Recording Schedule
Before you start:
Please make sure a local storage card is inserted in the speed dome or the network
storage is added to the speed dome, and the storage media has been initialized.
Purpose:
There are two kinds of recording for the speed domes: manual recording and
scheduled recording. For the manual recording, refer to
Section 4.4 Recording and
In this section, you can follow the instructions to
configure the scheduled recording. By default, the record files of scheduled recording
are stored in the SD card (if supported) or in the network disk.
Steps:
1.
Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
© Hikvision
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]