User Manual of Network Speed Dome
© Hikvision
86
6.6.2
Configuring Video Loss Alarm
Steps:
1.
Enter the Video Loss Setting interface:
Configuration > Advanced Configuration> Basic Event > Video Loss
Figure 6-49
Video Loss
2.
Check the
Enable Video Loss Detection
checkbox to enable the video loss
detection.
3.
Click
to edit the arming schedule for video loss detection. The arming
schedule configuration is the same as the setting of the arming schedule for
motion detection. Refer to
Step 2
in
Section
6.6.1 Configuring Motion Detection.
4.
Check the checkbox to select the linkage method taken for the video loss alarm,
notify surveillance center, send email and trigger alarm output are selectable.
Please
Step 3
in
Section
6.6.1 Configuring Motion Detection
5.
Click
to save the settings.
6.6.3
Configuring Video Tampering Alarm
Purpose:
You can configure the speed dome to trigger the alarm actions when the lens is