User Manual of Network Speed Dome
© Hikvision
64
The system can be configured to send an Email notification to all designated
receivers if an alarm event is detected, e.g., motion detection event, video loss,
tamper-proof, etc.
Before you start:
Please configure the DNS Server settings under
Basic Configuration >
Network >
TCP/IP
or
Advanced Configuration >
Network > TCP/IP
before using the Email
function.
Steps:
1.
Enter the Email Settings interface:
Configuration >
Advanced Configuration > Network > Email
Figure 6-24
Email Settings
2.
Configure the following settings:
Sender:
The name of the email sender.
Sender’s Address:
The email address of the sender.
SMTP Server:
The SMTP Server IP address or host name (e.g.,
smtp.263xmail.com).
SMTP Port:
The SMTP port. The default TCP/IP port for SMTP is 25.
Enable SSL:
Check the checkbox to enable SSL if it is required by the SMTP
server.
Attached Image:
Check the checkbox of Attached Image if you want to send
emails with attached alarm images.
Interval:
The interval refers to the time between two actions of sending attached
pictures.
Authentication
(optional): If your email server requires authentication, check
this checkbox to use authentication to log in to this server and enter the login