User Manual of Network Speed Dome
© Hikvision
41
Figure 5-3
Configure the PTZ Limit
2.
Click the checkbox of
Enable Limit
and choose the limit type as manual stops or
scan stops.
Manual Stops:
When manual limit stops are set, you can operate the PTZ control panel
manually only in the limited surveillance area.
Scan Stops:
When scan limit stops are set, the random scan, frame scan, auto scan, tilt scan,
panorama scan is performed only in the limited surveillance area.
Manual Stops
of
Limit Type
is prior to
Scan Stops.
When you set these two
limit types at the same time,
Manual Stops
is valid and
Scan Stops
is invalid.
3.
Click the PTZ control buttons to find the left/right/up/down limit stops; you can
also call the defined presets and set them as the limits of the dome.
4.
Click
Set
to save the limits or click
Clear
to clear the limits.
5.4
Configuring Scheduled Tasks
Purpose:
You can configure the network dome to perform a certain action automatically in a
user-defined time period.
Steps:
1.
Enter the Scheduled Task Settings interface: