User Manual of Network Speed Dome
© Hikvision
38
Chapter 5
PTZ Configuration
5.1
Configuring Initial Position
Purpose:
The initial position is the origin of PTZ coordinates. It can be the factory default initial
position. You can also customize the initial position according to your own demand.
Customize an Initial Position:
Steps:
1.
Enter the Initial Position Configuration interface:
Configuration
>
Advanced Configuration
>
PTZ
>
Initial Position
Figure 5-1
PTZ Configuration
2.
Click the PTZ control buttons to find a position as the initial position of the dome;
you can also call a defined preset and set it as the initial position of the dome.
3.
Click
Set
to save the position.
Call/delete an Initial Position:
You can click
to call the initial position. You can click
to delete the
initial position and restore the factory default initial position.
5.2
Configuring Basic PTZ Parameters
Purpose: