Network Video Recorder User Manual
158
●
The camera connection will be disabled when the device works in the hot spare mode.
●
It is highly recommended to restore the defaults of the device after switching the working
mode of the hot spare device to normal mode to ensure the normal operation afterwards.
17.3 Set Working Device
Step 1
Go to System > Hot Spare.
Step 2
Set the Work Mode as Normal Mode.
Step 3
Check Enable.
Step 4
Enter the IP address and admin password of hot spare device.
Figure 17-3
Hot Spare
Step 5
Click Apply.
17.4 Manage Hot Spare System
Step 1
Go to System > Hot Spare in hot spare device.
Step 2
Check working devices from the device list and click Add to link the working device to the hot
spare device.
A hot spare device can connect up to 32 working devices.
