HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual Download Page 25

Page: 25 / 222

Network Video Recorder User Manual

Table 1-5

Panel Description

No. Name

Function Description

Front Panel
Lock

Locks or unlocks the panel by the key.

Power Button

Turn on/off device.

Solid blue: Device is on.

Solid red: Device is off.

Mute Button

Turn on/off alarm beep.

Solid blue: Alarm sound is off.

Unlit: Alarm sound is on.

HDD Indicator

Solid red: At least one HDD is installed.

Unlit: No HDD is detected.

Flashing red: HDD is reading/writing.

Tx/Rx

Flashing blue: Network transmission is normal.

USB Interface

USB 2.0 interface for additional devices such as USB mouse
and USB Hard Disk Drive (HDD).

HDD Sequence
Indicator

Shows the HDD sequence.

LCD

7-inch LCD for live-view image and menu operation.

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series































































































































































































































Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series, User Manual

Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands