Network Video Recorder User Manual
104
8.2.3 Manually Rebuild Array
Purpose:
If no hot spare disks are configured, rebuild the degraded array manually.
Before you start:
At least one available physical disk should exist for rebuilding the array.
Step 1
Go to Storage > RAID Setup > Array.
Figure 8-6
Array List
Step 2
Click
of degraded array.
Figure 8-7
Rebuild Array
Step 3
Select the available physical disk.
Step 4
Click OK.
Step 5
Click OK on the pop up message box “Do not unplug the physical disk when it is under
rebuilding”.
