HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual Download Page 209

Page: 209 / 222

Network Video Recorder User Manual

207

Figure 19-9

Edit User (Admin)

Step 3

Edit the admin user information as demand, including the new admin password (strong
password is required), and MAC address.

Step 4

Edit the unlock pattern for the admin user account.

Check the checkbox of Enable Unlock Pattern to enable the use of unlock pattern when
logging in to the device.

Use the mouse to draw a pattern among the 9 dots on the screen, and release the mouse
when the pattern is done.



Please refer to Chapter 2.3 Configure Unlock Pattern for Login for detailed instructions.

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series































































































































































































































Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series, User Manual

Search results

Summary of Contents for DeepinMind iDS-6700NXI-I/8F(B) Series

Reviews:

Related manuals for DeepinMind iDS-6700NXI-I/8F(B) Series

Brands by name

Popular brands