Quick Start Guide of Blazer Express
21
5.
Input the user name and new password, and click
Login
.
Notes:
If failed password attempt of current user is detected, you are required to input the verification code
before you can log in. The failed password attempt from current client, other client and other address
will all require the verification code.
The failed password attempt and verification code attempt from current client, other client (e.g.,
Control Client) and other address will all be accumulated. Your IP address will be locked for a
specified period of time after specific number of failed password or verification code attempts. For
detailed settings of failed login attempts and locking duration, refer to
User Manual of Blazer Express
Web Client
(S
ecurity Settings)
.
The account will be frozen for 30 minutes after 5 failed password attempts. The failed password
attempt from current client, other client (e.g., Control Client) and other address will all be accumulated.
If you have updated your Blazer Express, you may need to clear the cache of your web browser to
display the Web Client page properly. Consult your IT system administrator if you do not know how to
clear the cache.
Quick Start
Here we introduce the configuration for some basic functions of the Blazer Express via Web Client and Control
Client.
Resource Management and Live View
Purpose:
Before you can live view, play back via the Control Client or set recording schedule, event configuration via Web
Client, you need to add network cameras or encoders to the system and manage them by areas.
Log in to the Blazer Express via Web Client, and click
Physical View
to open the resource management page and
the following two function pages are available.
Encoding Device:
Add, edit and delete the devices (network cameras and encoders).
Local Storage:
Manage the connected HDDs of Blazer Express and allocate the storage space to the added
cameras.
Here we introduce the configuration of adding the active online devices in the same local subnet with the Web
Client, adding devices by specifying the IP address, and adding devices via PoE interface. For other methods to
add the devices, refer to the
User Manual of Blazer Express
Web Client
.
Adding the Online Device
Before you start:
You must properly configure the network settings for the Blazer Express.
Steps:
1.
Click the
Physical View.
2.
Click
Encoding Device
and check the checkbox of the camera(s) to add from the Online Device panel.
Note:
For the inactive camera, you need to create the password for it before you can add it properly. For
detailed steps, refer to
User Manual of Blazer Express
Web Client (Resource Management>Adding the
Devices>Creating the Password)
.
3.
Click
Add to Device List
to open the camera adding dialog.
4.
Input the required information.
