ID6000 Series Smart Code Reader User Manual
52
Result Output via TCP Server
When the communication protocol is TCP Server, camera mode is Normal and trigger mode is On,
you need to set following parameters in the Data Processing.
NoRead Image Index
It sets the specific image that is outputted when no barcode information is read. For example, if
you set this parameter as 5, and the 5th image will be output.
TcpServer Output Barcode Name Enable
If this parameter is enabled, the outputted barcode information will contain the name of the
barcode.
TcpServer Output Barcode Position Enable
If this parameter is enabled, the outputted barcode information will contain the position of the
barcode.
TcpServer Output Barcode Angle Enable
If this parameter is enabled, the outputted barcode information will contain the angle of the
barcode.
TcpServer Output Barcode MainPackageID Enable
If this parameter is enabled, the outputted barcode information will contain the package ID.
TcpServer Output NoRead Enable
If this parameter is enabled, when no barcode is recognized, the device will output the content
you set in Tcp Output NoRead Text.
TcpServer Output Start Text
The contents of the start part of the data outputted. You can set the contents according to
actual condition.
TcpServer Output Stop Text
The contents of the end part of the data outputted. You can set the contents according to actual
condition.
TcpServer Output TcpDelimiter
It refers to the delimiter that separates barcode name, position, angle, package ID, etc. You can
set it according to actual condition.
