ID6000 Series Smart Code Reader User Manual
41
Select Acquisition Stop Active
If acquisition stops, the output signal will be triggered. When you select AcquisitionStopActive as
Line Out Activation Event, you can set its output delay time and duration.
Line Out Delay Time
It sets the delay time for outputting the output signal.
Line Out Duration
It sets the time duration of the output signal.
Figure 7-28 Select Acquisition Stop Active
Select Frame Burst Start Active
Note
The Frame Burst Start Active is not supported when the trigger polarity is level high or level low.
If the burst of a frame starts, the output signal will be triggered. When you select Frame Burst
Start Active as Line Out Activation Event, you can set its output delay time and duration.
Line Out Delay Time
It sets the delay time for outputting the output signal.
Line Out Duration
It sets the time duration of the output signal.
