English
37
22. Do not use saw blades manufactured from high speed steel.
23. Use only saw blades recommended by HiKOKI.
24. The saw blades should be from 290 mm to 305 mm external diameter ranges.
25. Select the correct saw blade for the material to be cut.
26. Never operate the compound miter saw with the saw blade turned upward or to the
side.
27. Ensure that the workpiece is free of foreign matter such as nails.
28. Replace the table insert when worn.
29. Do not use the saw to cut other than aluminium, wood or similar materials.
30. Do not use the saw to cut other materials than those recommended by the
manufacturer.
31. Blade replacement procedure, including the method for repositioning and a
warning that this must be carried out correctly.
32. Connect the compound miter saw to a dust collecting device when sawing wood.
33. Take care when slotting.
34. When transporting or carrying the tool, do not grasp the holder. Grasp the handle
instead of the holder.
35. Start cutting only after motor revolution reaches maximum speed.
36. Promptly cut OFF the switch when abnormality observed.
37. Shut
o
ff
power and wait for saw blade to stop before servicing or adjusting tool.
38. During a miter or bevel cut the blade should not be lifted until it has stopped
rotation completely.
39. Take all the possibility of residual risks in cutting operation into your
consideration, such as the laser radiation to your eyes, the inadvertent access to
moving parts on slide mechanical parts on machine and so on.
SYMBOL
WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
To reduce the risk of injury, user must read instruction manual.
000Book̲C12LCH̲ChS.indb 37
000Book̲C12LCH̲ChS.indb 37
2018/03/27 17:48:21
2018/03/27 17:48:21
