English
51
1. Mounting the saw blade (
Fig. 26
,
Fig. 27
and
Fig. 28
)
(1) Rotate the lower guard (plastic) to the top
position.
(2) Press in spindle lock and loosen bolt with 17 mm
box wrench (standard accessory).
Since the bolt is left-hand threaded, loosen by
turning it to the right as show in
Fig. 27
.
NOTE
If the spindle lock cannot be easily
pressed in to lock the spindle, turn the
bolt with 17 mm box wrench (standard
accessory) while applying pressure on
the spindle lock.
The saw blade spindle is locked when
the spindle lock is pressed inward.
(4) Remove the bolt and washer (B).
(5) Lift the lower guard and mount the saw
blade.
WARNING
When mounting the saw blade,
con
fi
rm that the rotation indicator
mark on the saw blade and the
rotation direction of the gear case
(see Fig. 1 on page 38) are properly
matched.
(6) Thoroughly clean washer (B) and the
bolt, and install them onto the saw blade
spindle.
(7) Press in the spindle lock and tighten the
bolt by turning it to the left by standard
accessories wrench (17 mm box wrench) as indicated in
Fig. 27
.
CAUTION
○
Con
fi
rm that the spindle lock has returned to the retract position after installing or
removing the saw blade.
○
Tighten the bolt so it does not come loose during operation.
○
Con
fi
rm that the bolt has been properly tightened before the power tool is started.
2. Dismounting the saw blade
Dismount the saw blade by reversing the mounting procedures described in paragraph 1
above.
The saw blade can easily be removed after lifting the lower guard.
Spindle Lock
Fig. 26
Bolt
Washer (B)
17 mm Box
Wrench
Fig. 27
Saw Blade
Bolt
Washer (B)
Washer (A)
Fig. 28
000Book̲C12LCH̲ChS.indb 51
000Book̲C12LCH̲ChS.indb 51
2018/03/27 17:48:23
2018/03/27 17:48:23
