HIGHLEAD DY-850, Instruction Manual

Page: 45 / 46

序号
Fig.No.
样本编号
Part No.
名 称
Description
数量
Pcs.
备 注
Remarks
J01 HA100J2110 小油壶
Oiler 1
J02 HA307J0067 机壳铰链组件
Hinge of machine head assy 1
J03 HA300J2060 机头防振垫块(小)
Rubber cushion(small) 2
J04 HA300J2050 机头防振垫块(大) Rubber cushion(big) 2
J05 HA120J8001 油瓶 Oil container 1
J06 HA300J2210 螺钉起子(小) Screw driver(short) 1
J07 HB00001030 内六角扳手(3) Hexagon socket screw key (3) 1
J08 HA300J2070 螺钉起子(大)
Screw driver(long) 1
J09 机针
Needle 4
DP×17 #18-#22
J10 HB00001020 内六角扳手(2)
Hexagon socket screw key (2) 1
J11 HA100J2120 磁块 Magnet 1
J13 H1100E2010 梭芯 Bobbin 3
J14 HA200J2030 线架组件 Thread stand assy 1 GXJ-2
J15 H6008L8001 油盘 Oil seservoir 1
J16 H6015L8001 油盘垫(大)
Gasket for oil reservoir ( big ) 1
J17 H007013090 开口挡圈
E-type ring 1
J18 HA106J0661 膝控提升顶杆
Knee lifter lifting rod 1
J19 H6009L8001 油盘垫(小) Gasket for oil reservoir ( small ) 1
J20 HA104J0652 放油螺钉 Oil drain screw 1
J21 HA104J0653 放油螺钉垫圈 Washer 1
J22 HA300J2160 膝控铰链轴 Hinge pin for knee lifter 1
J23 HA106J0663 碰块弯杆接头
Joint for knee lifter bell crank 1
J24 HA106J0664 碰块弯杆接头螺钉
Set screw 2
SM5/16″×18
J25 H5309I8001 膝控碰块弯杆
Knee lifter bell crank 1
J26 HA106J0667 碰块架螺钉 Set screw 1 SM15/64″×28
J27 HA106J0666 碰块架 Bracket for knee lifter plate 1
J28 HA106J0665 膝控碰块 Knee lifter plate 1
J29 HA106J0668 碰块垫 Pad for knee lifter plate 1
J30 HA104J0657 膝控复位弹簧
Backspring for knee lifter 1
J31 HA110D0672 膝控限位架螺钉
Screw 1
J32 HA104J6510 调节螺母
Lock nut 2
J33 HA104J0659 膝控限位调节螺钉 Adjusting screw 2
J34 HA104J0658 膝控限位架 Knee lifter stop bracket 1
J35 HFN9157101 调速器组件 Governor assy 1
J36 HFN9167101 安装木螺钉 (3 只 ) Wood screw(3) 1
J37 HFN9177101 踏板连杆组件
Pedal connecting rod assy 1
J.附件 ACCESSORIES
─ 41 ─