HIGHLEAD DY-850, Instruction Manual

Page: 8 / 46

— —
6
7. 针距、倒顺送料
SET STITCH LENGTH AND REVERSE FEEDING
1)
针距的长短，可以用转动针距表盘 A 来调节。针
距表盘 A 的平面 B 上的数字表示针距长短尺寸(单
位为毫米
)
。
2)
倒向送料时，可以将倒缝操作杆
C
，向下揿压，即
能进行倒送。手放松后，倒缝操作杆
C
自动复位，
恢复顺向送料。
3)
缝制中轻轻按下倒缝按钮的期间，进行倒缝，手放开
按钮，恢复顺缝。推动照明按钮，可打开
LED
灯照明。
1) Stitch length can be set by turning Dial ( A ).The
figures on Face ( B ) of dial show stitch length in mm.
2) Reverse feeding starts when Reverse Feed Lever (C)
is depressed, and the machine will feed forward again
if Reverse Feed lever ( C ) is released.
3) With the backstitch button pressed lightly during sewing,
reverse sewing can be done. When the push-button is
released, reverse sewing turns into forward sewing. Push
the lighting button to turn on the LED light.
8.压紧杆高度定位
POSITION PRESSER BAR
先旋松压紧杆的调压螺钉锁紧螺母 E，然后旋松调压
螺钉 A，卸下面板 B 的橡皮塞，旋松螺钉 C，定出压紧杆的
位置(压紧杆的正确定位：在压脚上升最高时，针板面与压
脚底面距离为 6 毫米)，旋紧螺钉 C，塞上橡皮塞，再旋紧
压紧杆螺钉 A，然后旋紧调压螺钉锁紧螺母 E，即成。
Loosen lock Nut ( E ) and Pressure Regulating Thumb
Screw (A). Remove rubber plug from Face Plate (B). Loosen
Screw (C) and adjust the position of Presser Bar (D) till the
presser foot is 6 mm above the throat plate will the presser
foot lifted to its highest. Tighten Screw (C) and put in the
rubber plug. Tighten pressure Regulating Thumb Screw (A)
and Lock Nut (E).