background image

Precautions not to damage the appliance 

  Raw pan bottoms or damaged saucepans (not enamelled cast iron pots) may damage 

ceramic glass.  

  Sand or other abrasive materials may damage ceramic glass. 

  Avoid dropping objects, even little ones, on the vitroceramic. 

  Do not hit the edges of the glass with saucepans.  

  Make sure that the ventilation of the appliance is in accordance with 

the manufacturer’s 

instructions. 

  Do not put or leave empty saucepans on the vitroceramic hobs. 

  Sugar, synthetic materials or aluminium sheets must not come into contact with the 

heating zones. These may break or damage the vitroceramic glass when cooling: switch 
on the appliance and take them immediately out of the hot heating zone (be careful not to 
burn yourself).  

  Never place any hot container over the control panel. 

  If a drawer is situated under the installed appliance, make sure the space between the 

contents of the drawer and the base of the appliance is large: at least (2 cm). This is 
essential to guarantee correct ventilation.  

  Never put flammable objects (ex. sprays) into the drawer under the vitroceramic hob. 

Cutlery drawers must be resistant to heat.  

Precautions in case of appliance failure 

  If a defect is noticed, switch off the appliance and turn off the electrical supply. 

  If the ceramic glass is cracked or fissured, you must unplug the appliance and contact 

after sales service. 

  Servicing must be done by specialists. Do not open the appliance by yourself. 

 

WARNING

: If the surface is cracked, switch off the appliance to avoid the possibility of 

electric shock. 

 

If the supply cord is damaged, it must be replaced by the manufacturer or its 
service agent or similarly qualified person in order to avoid a hazard

Other protections 

  Ensure that the pot or pan is always centred on the cooking zone.  The bottom of the pan 

must cover as much of the cooking zone as possible.  

  For the users of pacemaker, the magnetic field could influence its operating.  We 

recommend discussing this with the retailer or a doctor.  

  Do not to use aluminium or synthetic material containers:  they could melt on cooking 

zones that are still hot. 

 

DO NOT USE INTERMEDIATE REMOVABLE ACCESSORIES TO HEAT 

PANS WHICH ARE NOT ADAPTED TO INDUCTION. 

THIS RISKS BURNS AND DETERIORATION OF THE HOB. 

Summary of Contents for HP4IFC-2





















Reviews: