background image

__________________________________________________________________________________________

10 

www.hightechpet.com 

High Tech Pet Products, Inc.

Charging the Transmitter

When the battery is low, the LOW BATT light will illuminate. When 

this happens:

1.   Plug the charger into a standard AC wall outlet.

2.  Remove the rubber protector over the DC Charging Recep-

tacle and insert one of the charger’s plugs into the Receptacle.  

The CHRG LED will illuminate.  

3.  When charging is completed the CHRG LED will automatically 

extinguish.  Disconnect the charging plug from the transmitter.  

4.  Place the rubber protector back over the DC Charging 

 Receptacle to eliminate dirt getting into the transmitter.

Charging the Collar

When the battery is low, the LOW BATT light will illuminate.  When 

this happens:

1.  Plug the charger into a standard AC wall outlet.

2.  Insert one of the charging plugs into the collar receptacle 

marked DC JACK.  The CHRG LED will illuminate.  

3.  When charging is completed the CHRG LED will automati

-

cally extinguish.  Disconnect the charging plug from the  collar.  

Note:

   The Charger may remain plugged into the AC wall  outlet 

indefinitely.  Or you may remove it between charging to 

conserve a small amount of electricity.

Summary of Contents for Express Train













Reviews: