17
SNMP Server
: Enable or disable the SNMP service and set the service address.
3.1.6 Line Configurations
Line1 Configurations, Line2 Configurations and Line3 Configurations are used to set
parameters of accounts from Line1 to Line3. If you have more than 1 account, configure them in
separate lines and make sure the line switch is “on”. If you just have one account, please set the
line switch of others line to “off”. If you don’t need STUN when registering or talking, please set
the “SIP STUN Switch” and “RTP STUN Switch” to off.
1
Check with your service provider, whether or not it need Stun, whether it need to support
“rport” or port in from section of signal.