Page 12/34
Step 3: Fan Setup & Elevator installation
The above picture shows the HET 9305
Fan and Typhoon 600-42 Motor used for
our Sniper. Do not yet install the motor in
the fan unit. The installation of the fan will
be easier if the motor is installed at a later
time (we made life complicated for this
manual and installed the motor first
!).
Insert the Fan into the fuselage and
carefully slide it into the intake duct.
Rotate the fan so that the 2 mounting lugs
are horizontal. Once in place use making
tape to secure it in place.
View the plane from the rear and shift the
fan until you have a straight thrust line.
Tape the fan in place so that it can’t move.
The kit includes 2 fan mounting brackets
which should be used to secure the fan in
place. Locate the 6 plywood pieces and
assemble them as shown in the drawing
above.
