28
Once the Via gateway is powered, it will in turn power the BGAN terminal. The BGAN terminal LED between the cable
glands will initially flash green while booting up, and then flash yellow while the BGAN produces a beeping sound. This
means you can proceed with the BGAN pointing process below.
STEP 05: POINTING THE BGAN TERMINAL.
Turn and tilt the BGAN terminal and use the
pointing sound to obtain the highest possible
signal strength. The more frequently the beep
sounds, the higher the signal strength.
1.
FIG. 12.1
The moment the highest possible signal strength
is acquired, the sound will turn into a continuous
beep.
2.
FIG. 12.2
SECTION 03