Hi-Target HTS-420R Manual Download Page 76

Page: 76 / 192

Total Station Manual

75 -

[SO-PT]

：

Press [SO-PT] to input a stakeout point without point name and being saved into

job.

Steps

Key

Display

○

1 Press [F4] (

↓

) to view

the third page of soft keys.

[F4]

EDM

View

Polar

SO-PT

Coord.

ALL

DIST

REC

[Stakeout] 1/3

Search   :
Pt.      :
T.H      :
   Hz    :  ←
         :  ---
         :  ---

1.500 m

-13°29′60″

------
------

○

2 Press [F2](SO-PT) to go

to  SO-Input  data  screen.
Input  the  coordinates  of
stakeout  point.  After  input
one  item,  the  curser  will

move to next input item.

[F2]
+
Input point
name and
coordinates

+
[ENT]

0.000 m

Zero

[SO-Input data]

N        :
E        :
Z        :

0.000 m
0.000 m

○

3 After finishing inputs,

press [F4](OK) to save the

data.  And  then  back  to
Stakeout  screen.  Start  to
stakeout  the  input  point.

The program will name this
point

DEFAULT

automatically.

※

ALL

DIST

REC

[Stakeout] 1/3

Search   :
Pt.      :
T.H      :
   Hz    :  ←
         :  ---
         :  ---

1.500 m

-13°29′60″

------
------

※

：

[SO-PT]: The input point won’t be saved into job.

Summary of Contents for HTS-420R

































































































































































































Search results

Summary of Contents for HTS-420R

Reviews:

Brands by name

Popular brands

Hi-Target HTS-420R, Manual

Search results

Summary of Contents for HTS-420R

Reviews:

Brands by name

Popular brands