Hi-Target HTS-420R Manual Download Page 62

Page: 62 / 192

Total Station Manual

61 -

2.2

Select the Fix Point in the Memory [List]

User can select the fix point in the memory's jobs to set station without

inputting the point name.

Steps

Key

Display

○

2 Press [F2](List) in the

[Set STA] screen.

[F2]

[Set STA]

Input STA PT!

Station :

Find

List

Coord.

○

3 Show the point list all

the fix points and measured
points of the current job.

[Find Pt.] 1/5

DEFAULT Station

View

Job

STN1                 Station
200007               Meas. PT
200008               Meas. PT
100                  Target PT

Coord.

○

4 Select the needed point

through Up and Down key.
[View]:

Show

the

informations of this point.
[Coord.]:

Input

the

coordinate datas manually.
[Job]: Select datas from
another job.

↑

↓

[View]

：

           [View Coord.]
Job :                DEFAULT
Pt. :                    121
X   :                0.000 m
Y   :                0.000 m
Z   :                0.000 m
Date:               20150515

[Coord.]

：

           [Input Coord.]
Job       :             DEFAULT
Pt.       :
N         :
E         :             0.000 m
Z         :             0.000 m

Back

121

0.000 m

[Job]

：

Summary of Contents for HTS-420R

































































































































































































Search results

Summary of Contents for HTS-420R

Reviews:

Hi-Target HTS-420R, Manual, Page: 62 / 192

Search results

Summary of Contents for HTS-420R

Reviews: