orient this bracket and mirror it for the other side. Notice the increased distance between the top two
screw holes and the lower screwholes and the flange being oriented on the outside.
Figure 20: Rack Latch Bracket Installed
b) Use 6 of the included M5 x 12mm screws and the T15 Torx screwdriver to install each bracket, 3
screws per bracket.
Caution:
Always install the top cover onto the enclosure before installing the chassis into a rack.
Not having the top cover installed may damage the alignment brackets.
41
5
Installation
Installation Guide
5.2
Ultrastar 8 Installation Procedure
