10
www.hglrc.com
When a parameter can be modified, the parameter’s current
value will be shown on the right-hand side of the screen. In
this case, roll left/right will adjust the parameter up and
down.
The screen to the right shows the current vTX settings. From
here, you can change the frequency band, channel, and
power level of the video transmitter. After making the
changes, move the cursor to “Set” and press roll-right to
confirm the settings.
7.Mixer
Example 1: I need to use a flying wing model. Click on the platform
configuration to select the AirpIane type. Select the flying wing model
hybrid. Finally click on Load and Apply.
8.Presets
Select a preset from the iNav presets tab that fits your aircraft the best,
then press "
Apply
"
9.URAT serial port use
URAT1 uses the DSM2/i.BUS/SmartPort
URAT2 uses the VTX
URAT3 uses the GPS/Compass
URAT4 uses the ESC telemetry
URAT6 uses the SBUS