Heyl EcoControl DO10 Operating Instructions Manual Download Page 15

13/17

Operating info

You can request the current counter statuses here.

Desalination

Displays the number of desalinations since the last counter reset.

Reset

In this menu you have to reset the regeneration meter to the initial value via the “Reset
(ENTER) “key.

Operating hours

The unit records the operating hours of the plant/controller.

Reset

You can reset the current operating time to 0 hours: 

"M"

 

º

 Service 

º

 Operating Hours 

º

 Reset

Water quantities

The unit records the following water quantities:

WM total

The total quantity of supplied water since the last reset.
The counter restarts at 0 if  99999.9m

3

 is exceeded.

WM desalination

The quantity of suppled water during desalination since the last reset.
The counter restarts at 0 if 99999.9m

3

 is exceeded.

WM additional water

The difference between the total quantity of water and the quantity of water during
desalination
 

Time / Date

Please observe that the integrated clock only continues to run if the unit is switched on.
Correct, if necessary, the time and date after a longer period of voltage loss or if the plant
has been switched off.

Anzeige:

 

"M"

 

º

 Service 

º

 Time Date

 

The display shows the date and time of the controller.

Set:

 Press the “ENTER“ key under menu 

"M"

 

º

 Service 

º

 Time Date

Set and change the time and date by selecting the desired position via the arrow keys. Press the "ENTER" key to save the
setting and to return to the display function.

Error history

Open the error history via “display”. The error history is a list of errors and statuses which
have occurred during current operation.
An error is recorded with the time and date, 
e.g.:

Voltage loss
06:56   16.12.04

The list is not deleted after voltage loss.
The buffer of the error history is deleted and recording restarted via “delete“.

Please see the section “Error messages” for further information.

OPERATING INFO

Operating hours

Desalinations

WM total

WM desalination

WM add. water

Reset? (Enter)

OP.HRS.    125h

Reset? (Enter)

WM TOT. 412.3m

3

Reset? (Enter)

WM DES.   1.1m

3

Reset? (Enter)

WM ADD.: 12.3m

3

TIME       DATE

10:23  21.01.05

ERROR HISTORY

Display

Delete

Summary of Contents for EcoControl DO10




















Reviews: