9/17
Programming
"M"
º
Basic program
Enter password
The programming menu is protected by a 3-digit password (number between 000 and
999) in order to prevent unauthorised programming intervention.
Enter the password under
"M"
º
Basic program
º
Password input
and
confirm the input via the “ENTER” key.
You are now in the menu
BASIC PROGRAM
Change password
As soon as you are in the basic program you can enter your individual password in the submenu “Extras”.
Description of Functions and Programming
Switching on and voltage loss
After switching on the unit and after each voltage loss, the plant automatically returns to the initial position (desalination
off, no dosing).
Operation
The water meter impulses are continuously added up and, depending on the programming, the dosing output is switched.
Desalination is triggered once the additional quantity of water required to trigger desalination (start volume) has been
reached.
Desalination
Automatic desalination
The water meter impulses are added up. After reaching the preset quantity of water
(start volume in litres = sum of impulses x basic number of the water meter), the
desalination valve AV (relay K1) is switched for the set switching time (desalination
time).
• The desalination time can be programmed between 0 and 99 minutes and 59
seconds (as mm:ss).
• Due to the start of desalination the volume memory for the quantity of start water
is reset to 0 litres.
• During current desalination, the lamp "Desalination" lights up, the message
"Desalination" is shown on the display and the remaining running time is
displayed in the bottom line in minutes and seconds (mm:ss).
• The water meter impulses are also registered and processed
during
current
desalination (metering and dosing).
• During drainage and subsequent refilling of the system, desalination and
metering of the water meter impulses are disabled/locked.
Menu:
BASIC PROGRAM
Password input
PASSWORD INPUT
Password 000
DESALINATION
Start volume
Desal.time
02000 l
START VOLUME
DESAL.TIME
mm:ss 02:30