8/17
MENU
Service
Information
Basic program
"M"
LL dosing medium container empty
Connect a float switch or similar device here to monitor the dosing medium container.
Enter the desired effect of the contact (active as normally closed or normally open) and set the delay time used for testing
in menu
"M"
º
Basic Program
º
Program Values
º
Functions
º
Fct. Empty
If, in addition to the error message in the display, the alarm relay should also switch during an empty message, program
the alarm function.
Also enter a delay time to ensure evaluation for bouncing contacts.
Function
Type of Contact
Test Time
Action
LL
S
Level transmitters input:
Dosing medium container
EMPTY
programmable
normally
closed/normally open
programmable
00 - 99 seconds
S
Error message
S
Entry in error list
S
Continious alarm if programmed
Programming
Menu start
Call the menu via the "M" key.
Menu selection / Selection
The current line position is displayed as a heading in CAPITAL LETTERS. Activate
the selected/displayed menu option via the "ENTER" key, i.e. you "jump" into a
submenu. Call the next menu option via the "DOWN" arrow key: "Scroll" through the
menu this way.
Input
Inputs are only possible in the BASIC PROGRAM menu and in some SERVICE
menu options.
Select a programming step via the “DOWN" and "UP" arrow keys and activate the
input function via the "ENTER" key.
When entering digits, the digit/position to be changed flashes.
Change to the next or previous digit (now flashing) via the "Right" and "Left" arrow
keys.
Change the value or selection via the "UP" and "DOWN" arrow keys.
Selection functions are marked with a
T
if selection is possible.
Terminate the input function via the "ENTER" key.
Change to the higher-order menu via the "M" key.
End menu
Return to the higher-order menu via the "M" key. After returning from the highest menu level, the unit is once again in the
display function. The controller returns to the normal operating display (automatic menu end) after 2 minutes if
no
key is
pressed in the menu.
Information Menu
"M"
º
Information
Request the current settings without entering a password in the information menu.
The information menu is still displayed even if an incorrect password has been entered.