Heybike Race 26, User Manual

Page: 8 / 19

5.Begin riding carefully. With the proper safety gear and rider knowledge, you may now operate
your bike. On a flat surface, in a low gear (1 or 2), most riders should be able to begin pedaling the
bike with pedal assist level 0 or 1. You may also use the thro�le to accelerate and maintain your
desired speed
6.The thro�le is used by slowly and carefully rota�ng the thro�le backward toward the rider. Do
not use the thro�le unless you are on the bike.
Do not use the thro�le while dismounted. Avoid accidental applica�on of the thro�le
while dismounted; any�me you are moving the bike while dismounted, ensure the
bike is powered off to prevent accidental applica�on of the thro�le.
Start-up procedure
A�er the bike has been properly assembled according to the assembly video, all components
are secured correctly, a cer�fied, reputable mechanic has checked the assembly, and you
have read this en�re manual, turn on the bike and select a pedal assist level following the
steps below:
1.Familiarize yourself with the ba�ery power posi�ons. Turn on the ba�ery first and cover the
rubber case, ready for a ride.
2. Turn on the bike. With the ba�ery locked in place. Locate the LCD display controls (near the
le� handlebar grip). Hold down the
POWER
bu�on for approximately 2 seconds un�l power is
delivered to the LCD display and turn on.
3.Turn on the headlight and taillight if needed or desired. Once the Ba�ery is on, press
bu�ons (located on the light remote).
4. Select the desired level of pedal assistance (PAS) between level 0 through 3 using the + and-
on the display remote. Level 1 corresponds to the lowest level of pedal assistance, and level 3
corresponds to the highest level of pedal assistance. Level 0 indicates pedal assistance is inac�ve.
Start in PAS level 0 or 1 and adjust from there.
13
B a�ery Key P osi�ons
12