HEXA HSDVR3507A, User Manual

Page: 46 / 88

H.264 Network DVR
Copyright 20090by hexacctv co.,Ltd
【 CHANNEL 】 Choose to the channel for motion detection , "all" means all the channels.
【 ALARM TYPE 】 Select the type of detection settings: motion detection.
【 ALARM DELAY 】 set corresponding delay time (5 ~ 255 seconds), when the external alarm is abolished, system will correspond delay time
automatically, then close the alarm output and interaction.
【 RECORDING 】 Select the desired video channel of the video channel (can repeat), when alarm occur, If the system is in"record automatically"
mode(video mode, see "3.4.1-channel video"),and the "alarm record" in the“record setting" is within the effective time (see" Video Settings 6.3 "),the
system will start the alarm record.
【 ALARM DEV OUT 】 The alarm output linkage occurs with alarm
【 SCHEDULE 】 To set the alarm output period for week, it means the alarm output and display are allowed within corresponding time
【 SENSITIVITY 】 Can be set as follows: the highest, high, average, low.
【 screen tips 】 within the time of selection,corresponding information will be shown when alarm occurs.
【 Copy the current settings to the following 】 users access to the channel settings can be copied to other channels, to achieve the same alarm
settings.
【 dynamic inspection area 】 click setting and then enter 。 The setting area is divided into 192(16X12)areas 。
The green area is dynamic detection zones, the white areas is area without any deployment . Hold and press the left mouse button to set up
detection region, press and hold the right mouse button to clear the detection region.Press “save” button to save the y dnamic detection of regional
settings. (Figure 6-10)