HEXA HSDVR3507A, User Manual

Page: 14 / 88

H.264 Network DVR
Copyright 20090by hexacctv co.,Ltd
CHARP.3 Basic Operations
3.1 Power on/Shut down
3.1.1 Power on
If the 【 POWER 】 mark lighting is out, please operate as follows:
First: If the power does not plug, please plug in the power, the DVR will start; if the DVR won’t start, please enter the next step;
Second: Open the power switch of the DVR, it will start.
If the 【 POWER 】 mark light is red, just please press the 【 POWER 】 key to start the DVR..
After started the DVR,the video output is the default multi-screen output mode, if the start-up time is in the recording time which have been
setted before, the system will automatically start recording function.
If you didn’t install hard disk before start the DVR, after you entered into the system, it will prompte as follows: (Figure 3-1)
Figure 3-1
3.1.2 Shut down
Right ways:
A . Hold down the POWER button about 3 seconds and confirm to shut down the system, and stop all the work of DVR.(Figure 3-2)