HEXA HSDVR3507A, User Manual

Page: 43 / 88

H.264 Network DVR
Copyright 20090by hexacctv co.,Ltd
【 Ethernet IP 】 Change the IP address parameter from the numeric keyboard or the soft keyboard (IP address can only be changed in this option)
【 Netmask 】 Setup the IP network mask address.
Physical address: Setup the physical address of network card. the digital input is the hexadecimal system. (Figure 6-7)
Figure 6-7
【 Gateway 】 Setup the gateway IP address.
【 DNS 】 Setup DNS server IP address.
【 Server Port 】 The default is 7777, may change it according to the user actual need and it will be effective after restart the system.
【 HTTP port 】 Default is 80, after the revision, restart the system and it will be effective.If the port has been changed,it must display the selected
HTTP port,such as:http://192.168.0.117:1234
【 DDNS Enable 】 Pass the dynamic domain name analysis server. Supports 3322 free dynamic domain name analysis (Register account at
http://www.3322.org).
【 PPPoE Auto Link 】 Input ISP (Internet service provider)provided PPPoE user name and password,Click " Dial UP" then starts to connect. After
connecting successfully, “PPPoE IP” will display the automatically obtained WAN's dynamic IP address. If choose 【 PPPoE Auto Link 】 option, DVR
will try to connect PPPoE when power on.
Note: After PPPoE dial up successful, user may visit the DVR remotly according to 【 PPPoE IP 】 displayed IP address, In local area
network,can visit the DVR through the network card.
6.6 Alarm Setup
"Main Menu"-"System"-"Alarm Setup" (Figure 6-8).